Back to overview

LED states

The LED states of the Anabox Smart

The front LED is located directly next to the handle on the front of the transparent inner shell and indicates the status of the ANABOX® smart.

A firmware update is being carried out. It takes a few minutes until the update is completed.

The NB-IoT or LTE-M network is being searched or a connection is being established.

Initialisation of the device (e.g. after Reset).

The battery level is low (1st warning, remaining runtime less than 5 days) and the ANABOX® smart needs to be charged.

The battery is low (remaining runtime less than 2 days) and the ANABOX® smart needs to be charged.

The battery level is very low (remaining runtime less than 6 hours) and the ANABOX® smart needs to be charged.

When the große Taste is pressed, the LED lights up green. This serves as a function test. If the LED does not light up, there is a problem.

The rear LED is located on the USB-C charging port directly next to the large button and indicates the charging status.

The USB port is connected and the battery is charging.

USB is connected and the battery is fully charged and in mains operation.

The battery is very deeply discharged, is being restored or a battery error has occurred.